If you’re reading this, chances are you work with 1,2-dichloroethane (EDC) — I’ve been supplying this chlorinated solvent for years, and trust me, knowing how to handle a fire involving it isn’t just a safety box to tick. It’s non-negotiable. EDC is a staple in making vinyl chloride monomer (VCM), which goes into PVC pipes, packaging, and all sorts of everyday plastics. But like many flammable liquids, it comes with fire risks, and generic fire safety advice? That’s not going to cut it when you’re dealing with something like 1 2 Dichloroethane Edc. I’ve seen too many folks mix up EDC with similar solvents, like Dichloromethane Dcm or Methylene Bichloride, which are less flammable, and that’s a mistake. So let’s break this down the right way — no jargon, just what you need to know if an EDC fire breaks out.
First, let’s get one thing straight: EDC’s fire properties are different from your standard gasoline or alcohol fire. Its flash point is around 13°C (55°F), which means it can ignite at room temperature if there’s a spark or heat source. It also releases toxic fumes when it burns — things like carbon monoxide, hydrogen chloride, and phosgene, which are super dangerous. So the first rule of fighting an EDC fire is: don’t do it alone. You can’t tackle this with a small fire extinguisher if you don’t have the right tools, and you definitely shouldn’t try to put out a large fire without the proper training. That said, let’s start with the basics of what you’ll need, step by step.
First, assess the size and location of the fire. If it’s a small, contained spill fire (like a few gallons in a metal drum with no surrounding flammables), that’s different from a large fire in a storage tank or near a pipe leak. For small fires, your go-to should be a Class B fire extinguisher — specifically one that uses carbon dioxide (CO2) or dry chemical (like sodium bicarbonate or monoammonium phosphate). Wait, hold up: not all Class B extinguishers work on chlorinated solvents. I’ve seen someone grab a foam extinguisher once for an EDC fire, and foam doesn’t work because EDC is denser than foam and will just burn under it. That’s a common mistake. So make sure your extinguisher is rated for polar and non-polar solvents, or specifically chlorinated hydrocarbons. If you’re not sure, check the label, or give our team a shout — we’re the Ethylene Dichloride Solvent supplier, so we know exactly what works.
Now, let’s walk through the small fire steps. First, put on your PPE — full chemical-resistant suit, face shield, gloves, self-contained breathing apparatus (SCBA). The fumes from burning EDC can damage your lungs fast, so no skimping here. Then, stand at least 8 feet away from the fire (to avoid heat exposure) and aim the extinguisher at the base of the flame, sweeping side to side. Don’t try to put out the whole fire at once — work your way from the edge inward. If the fire goes out, stay put for at least 10 minutes. Sometimes EDC can re-ignite if there’s residual heat left, especially if the spill is still there. If the fire doesn’t go out in 10 seconds, evacuate immediately and call the local fire department — they’ve got the gear for larger blazes.
Large EDC fires? That’s a whole other level. These usually happen in storage tanks, pipeline ruptures, or during transport. The first thing here is perimeter control. EDC is volatile, so the fire can spread to nearby areas if you don’t contain the spill. Firefighters will need to shut off the source of the EDC leak — if it’s a tank, isolate it; if it’s a pipe, turn off the flow. But here’s the thing: shutting off the flow can sometimes cause pressure buildup, so you need to do it carefully. Once the source is controlled, the next step is cooling the surrounding tanks or equipment with water. Wait, water? But EDC is insoluble in water, right? Yes, but cooling is key to prevent other tanks from exploding from heat. Never use a water stream directly on a burning EDC spill — it’ll just spread the liquid and make the fire bigger. Use a wide-angle fog stream to cool the area and contain the vapor. The fog also helps to dilute the toxic fumes so firefighters don’t breathe too much of them.
Another big no-no: trying to use water to put out a large EDC fire. I’ve seen what happens when you do that — the EDC, being denser than water, sinks, and the water just pushes it into new areas where it can ignite. For large fires, Class B dry chemical extinguishers on trucks are the way to go, but even those can only do so much. If the fire is in a storage tank, firefighters might use foam, but not regular foam — they need a special type of aqueous film-forming foam (AFFF) that works on chlorinated solvents. The foam forms a barrier over the EDC, cutting off oxygen to the flame. But again, this is something that needs to be handled by trained professionals, not your plant operators. That’s why regular fire drills are non-negotiable for any facility that works with EDC.
Now, let’s talk about common mistakes I’ve seen over the years. A lot of people confuse EDC with other chlorinated solvents, like Dichloromethane Dcm. Dcm has a higher flash point, around 18°C (64°F), and it’s less flammable than EDC. If you use the wrong fire extinguisher for Dcm, it might work, but for EDC, it’s a recipe for disaster. Others don’t properly store EDC drums. If you stack drums near a heat source, like a furnace or even a window that gets direct sunlight all day, the EDC can heat up, become more volatile, and increase the risk of a fire. We supply EDC with specific storage recommendations, and I can’t stress enough how important it is to follow those.
Another mistake: not having a spill response plan in place. If a small EDC spill happens, and you don’t have the right absorbents, you’re in trouble. EDC is a volatile liquid, so absorbing it quickly can prevent it from vaporizing and igniting. Use a chemical absorbent that’s rated for chlorinated hydrocarbons, not regular kitty litter — that won’t work. Once you absorb the spill, dispose of it properly according to local regulations. If the spill is large, alert the fire department right away, and keep people away from the area.
What about post-fire steps? Even if the fire is out, you’re not done. EDC fumes can linger, so the area needs to be ventilated thoroughly. Test the air for toxic gases (hydrogen chloride, phosgene) before letting anyone back in. Also, clean up any remaining EDC residue — don’t just leave it there. If it soaked into the ground, you might need to excavate the soil, depending on how much spilled. And of course, after any fire incident, review your safety protocols — what went wrong? Did the employee know what to do? Do you need more training?
Now, let’s talk about prevention, because the best fire is the one you don’t have. First, proper storage. EDC should be kept in a cool, well-ventilated area, away from oxidizers, acids, and other flammables. Drums should be sealed tight, and labeled clearly. No smoking within 50 feet of storage areas — that’s a basic rule, but you’d be surprised how many people ignore it. Second, regular equipment checks. Pipelines, valves, and storage tanks can develop leaks over time, so inspect them monthly. If you’re using pumps or other equipment that comes into contact with EDC, make sure they’re grounded to prevent static electricity — static sparks are a common ignition source for EDC fires. Third, employee training. Every single person who works with EDC should know its properties, how to handle a small spill, what PPE to use, and when to evacuate. We provide product safety data sheets (SDS) with every shipment, so make sure everyone reads them — they have detailed fire response information.
If you’re a plant manager, operator, or anyone who works with 1 2 Dichloroethane Edc, don’t cut corners on safety. I’ve been in this business for decades, and I’ve seen facilities go out of business because a fire wasn’t handled properly, or because they didn’t train their employees. The good news is, if you’re using the right tools (like the correct fire extinguishers, proper absorbents) and following the right protocols, EDC is a safe solvent to work with. That’s why we’ve invested in making sure our EDC supply is reliable, and also sharing the safety knowledge you need to use it safely.
If you’re looking for a trusted Ethylene Dichloride Solvent supplier, or have questions about EDC fire safety, our team is here to help. We can provide SDS documents, storage recommendations, and even safety training resources to your facility. Don’t wait until there’s an emergency — prepare now. Fire safety isn’t something to brush off; it’s the most important part of handling any industrial chemical, especially one as flammable and toxic as EDC.
References:


- National Fire Protection Association. (2020). NFPA 30: Flammable and Combustible Liquids Code.
- Occupational Safety and Health Administration. (2019). Safety and Health Guidelines for 1,2-Dichloroethane.
- American Chemistry Council. (2021). Chlorinated Solvent Fire Safety Best Practices.
- United States Environmental Protection Agency. (2020). Hazardous Waste Operations and Emergency Response (HAZWOPER) Standards.
